AML consumer data

Customer due diligence on buyers and sellers

When estate agents must check sellers and buyers, what to collect for individuals, companies, trusts and executors, scripts and ongoing monitoring.

Ava research teamPublished 6 min read

On this page
  1. What customer due diligence means for an agency
  2. When to check: the timeline
  3. What to collect for each type of customer
  4. Scripts that make checks routine
  5. Third parties, solicitors and other agents
  6. Ongoing monitoring during sales progression
  7. Records: what to keep and for how long
  8. Five common CDD mistakes
  9. Volume: why the process has to scale
  10. Frequently asked questions
  11. References

Key takeaways

  • The business relationship with a buyer starts when the seller accepts their offer[1], but HMRC recommends finishing buyer checks before acceptance[2].
  • Check sellers as soon as possible after first contact, and in any case by the time they instruct you[2].
  • Keep due diligence records for five years from the end of the business relationship[3].
  • Most friction disappears when buyers are told about checks at registration, not after their offer is accepted.

What customer due diligence means for an agency

Customer due diligence, or CDD, is the set of checks the Money Laundering Regulations require before and during a business relationship. For an estate agency it has four parts: identify the customer, verify that identity from a reliable source, identify and verify any beneficial owner, and understand the purpose and intended nature of the transaction, including how it is funded. Where risk is higher, enhanced checks apply on top.

HMRC's guidance is clear that customers include both buyers and sellers, and that where a third party acts for a customer you must verify that person and confirm they are instructed to act[2]. The work also starts earlier than many agencies think. HMRC treats arranging viewings and answering enquiries from potential buyers and sellers as estate agency activity[4], so the people you are dealing with at that stage may become customers you need to check.

When to check: the timeline

The legal trigger for a buyer is precise. An estate agent is treated as entering into a business relationship with a purchaser at the point when the purchaser's offer is accepted by the seller[1]. HMRC recommends going further: complete all aspects of CDD on a buyer as soon as possible after first contact, to avoid wasted costs and delays, but before an offer is accepted; and complete seller checks as soon as possible after first contact and at the latest when the relationship is established[2].

  1. Valuation booked

    Tell the seller that ID and ownership checks are part of instructing the agency, and send the request with the appointment confirmation.

  2. Instruction

    Verify the seller, any co-owners and any beneficial owner, and confirm ownership against the title register.

  3. Buyer registers or books a second viewing

    Explain that offers are accepted only once ID and funding checks are complete, and send the request.

  4. Offer made

    Collect the funding breakdown and source of funds evidence before putting the offer to the seller as acceptable.

  5. Offer accepted

    Confirm every check is complete and recorded. If anything is missing, do not mark the property sale agreed.

  6. Sales progression

    Monitor for changes and update the checks if the buyer, funding or payer changes.

The timing matters commercially as well as legally. HMRC says completions typically happen two to four months after an initial offer[5], and around 1 in 3 transactions fail[6]. A buyer who cannot evidence their funds is better discovered before the seller takes the property off the market.

What to collect for each type of customer

CDD by customer type
Customer typeIdentify and verifyAlso establish
IndividualFull name, date of birth and address, verified by photo ID or certified electronic verificationHow the purchase or sale fits their circumstances
Joint buyers or sellersEach person separatelyWho is providing the funds
CompanyCompany name, number, registered office and directorsBeneficial owners and who controls the company
TrustTrustees and the trust's detailsSettlor, beneficiaries and who controls the trust
Executors selling a probate propertyEach executor or administratorGrant of probate or letters of administration, and the estate's position
Attorney acting for an ownerThe attorney and the donorThe registered power of attorney and its scope

Record the purpose of the transaction in a sentence: 'Selling a buy-to-let flat to reduce portfolio' or 'First home purchase with a mortgage and a gift from parents'. That sentence is what you compare against later, when something changes.

Scripts that make checks routine

Buyers resist checks when they come as a surprise. Make them part of the process from the first serious conversation.

  • At registration: 'Before any offer is put forward, we'll need to verify your ID and how you're funding the purchase. It's a legal requirement for every buyer, and doing it now means your offer can be accepted straight away.'
  • After a second viewing: 'If you're thinking of offering, now is a good time to send your ID and a quick summary of your deposit and mortgage. I'll send you the secure link.'
  • When a buyer pushes back: 'I understand. Every agency has to do this, for every buyer. Without it I can't recommend your offer to the seller, however strong it is.'
  • With sellers: 'We check every seller's ID and ownership before we market a property. It protects you from someone trying to sell a home they don't own.'

Third parties, solicitors and other agents

Transactions often involve people acting for the customer: a property finder for the buyer, a relative handling a sale for an elderly parent, a company secretary instructing on behalf of a business. Verify the individual you are dealing with, confirm in writing that they are authorised to act, and still complete the checks on the customer behind them[2].

The buyer's solicitor and lender will run their own checks, but those do not replace yours. Their duties are different and they will not share their files with you. Treat your CDD as your own responsibility from start to finish, and never mark a check complete because another firm is involved.

Ongoing monitoring during sales progression

CDD does not end when the offer is accepted. Sales progression is where many risks surface: a buyer replaced by a company, a mortgage replaced by cash, funds arriving from a relative abroad. Treat these as triggers to revisit the file.

  • The buyer's name changes, or a new joint buyer is added.
  • The funding changes, especially a switch from mortgage to cash.
  • Money comes from an account not in the buyer's name.
  • The buyer asks to speed up completion without a clear reason.
  • The seller asks for proceeds to go to a third party.
  • New information makes the original purpose of the transaction look unlikely.

If checks cannot be completed, HMRC's guidance is not to proceed, to end any existing relationship and to consider whether a suspicious activity report is needed[2].

Records: what to keep and for how long

Keep copies of the documents and information you obtained for CDD, the results of electronic checks, notes of any questions asked and the answers, and who approved higher-risk cases. The regulations require records to be kept for five years beginning on the date you know, or have reasonable grounds to believe, that the business relationship has come to an end[3]. Delete them after that unless another law requires you to keep them, and say so in your privacy notice.

Store CDD records against the property and the customer in your CRM, not in a negotiator's inbox. When HMRC or your own auditor samples a file, the evidence should be in one place, with dates.

Five common CDD mistakes

  1. Checking the lead buyer but not the joint buyer who is providing half the funds.
  2. Accepting a company buyer without identifying the people who own and control it.
  3. Collecting a passport but recording nothing about how the purchase is funded.
  4. Leaving seller checks until the property is already live on the portals.
  5. Failing to update the file when the buyer's funding or name changes during sales progression.

Each mistake comes from a process that waits for someone to remember. Fix them with prompts in the CRM: a required field for every buyer's funding source, a block on sale-agreed status until all parties are verified, and an alert when a buyer's details change.

Volume: why the process has to scale

Every sale means checks on at least two customers, and more for joint buyers, companies and chains. UK residential transactions for April to September 2026 were a provisional 585,770, up from 545,920[7]. A busier market means more checks per negotiator, which is when shortcuts creep in.

UK residential transactions, April to September
UK residential transactions, April to SeptemberColumn chart. 2025: 545,920; 2026 (provisional): 585,770.0200,000400,000600,0002025: 545,920545,92020252026 (provisional): 585,770585,7702026 (provisional)UK residential transactions, April to SeptemberColumn chart. 2025: 545,920; 2026 (provisional): 585,770.0200,000400,000600,0002025: 545,920545,92020252026 (provisional): 585,770585,7702026(provisional)

Source: HM Revenue & Customs (GOV.UK), 2026[7]

Show the data
ItemValue
2025545,920
2026 (provisional)585,770

Example: a two-branch agency agrees 30 sales a month. With an average of 1.6 buyers and 1.4 sellers per sale, that is about 90 individual checks a month, plus companies and executors. The agency moves ID requests to the second viewing, uses a certified digital identity provider and assigns one administrator to chase missing evidence daily. Sales agreed without complete checks fall to zero within two months. For checks earlier in the funnel, see verifying viewer identity, and for higher-risk buyers, enhanced due diligence.

Frequently asked questions

When does an estate agent have to check a buyer?

The business relationship with a buyer starts when the seller accepts their offer[1]. HMRC recommends completing buyer checks before acceptance[2].

Do estate agents have to check buyers as well as sellers?

Yes. HMRC's guidance says customers include both buyers and sellers[2].

How long should CDD records be kept?

Five years from when you know, or have reasonable grounds to believe, the business relationship has ended[3].

What if a buyer refuses to provide ID?

Do not proceed. End the relationship and consider whether a suspicious activity report is needed[2].

References

  1. legislation.gov.uk (The National Archives) (2017). Money Laundering Regulations 2017, regulation 4: business relationship (opens in a new tab) ↑

  2. HM Revenue & Customs (GOV.UK) (2026). Anti-money laundering guidance for supervised businesses: AMLG2200 Estate agent business guidance (opens in a new tab) ↑

  3. legislation.gov.uk (The National Archives) (2017). Money Laundering Regulations 2017, regulation 40: record-keeping (opens in a new tab) ↑

  4. HM Revenue & Customs (GOV.UK) (2021). Money laundering supervision for estate agency businesses (opens in a new tab) ↑

  5. HM Revenue & Customs (GOV.UK) (2026). UK monthly property transactions commentary (opens in a new tab) ↑

  6. Ministry of Housing, Communities and Local Government (GOV.UK) (2025). Home buying and selling reform (consultation) (opens in a new tab) ↑

  7. HM Revenue & Customs (GOV.UK) (2026). UK monthly property transactions commentary (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo