Technology AI

Document management and cloud storage

Folder standards, naming, permissions, retention and backups for lettings documents, with the statutory deadlines each file has to prove were met.

Ava research teamPublished 7 min read

On this page
  1. What a lettings file has to prove
  2. Deadlines your documents must evidence
  3. A folder standard for every property
  4. Permissions by role
  5. Retention and deletion
  6. Choosing where documents live
  7. Backups that survive a bad day
  8. Moving from a messy shared drive
  9. Proof of service is the document that matters
  10. A monthly file check
  11. Worked example: a deposit dispute file
  12. Frequently asked questions
  13. References

Key takeaways

  • A lettings file exists to prove deadlines were met, such as deposit protection within 30 days of receipt[1] and the electrical report to tenants within 28 days of the inspection[2].
  • Use one folder standard and one naming convention for every property and tenancy, so anyone can find a document in seconds.
  • Give access by role, keep identity documents in the tightest folder and set retention periods by document type, including five years for AML records[3].
  • Back up independently of your main storage: 74% of UK businesses back up to the cloud, but only 48% use another method too[4].

What a lettings file has to prove

When a deposit dispute, a possession claim or a council inspection arrives, nobody asks whether you are organised. They ask for proof: when the deposit was protected, when the prescribed information was served, when the electrical report was given to the tenant, whether the right to rent check was done on time. A lettings document system is really an evidence system, and it should be designed around the questions it will be asked.

Most agencies hold the right documents somewhere. The problem is that they are scattered across email attachments, a shared drive, the CRM, a referencing portal and a negotiator's phone. Finding them under pressure takes hours, and some turn out to be the wrong version. A simple standard, applied to every tenancy, fixes most of this.

Deadlines your documents must evidence

Common lettings deadlines and the evidence a file should hold.
Document or actionRuleWhat to keep
Deposit protection and prescribed informationWithin 30 days of receiving the depositScheme certificate, prescribed information and proof of service
Deposit returnWithin 10 days of agreeing the amountAgreement record and payment confirmation
Electrical safety reportChecked at least every 5 years; copy to existing tenants within 28 days of inspectionReport, invoice and proof each tenant received it
Energy performance certificateValid for 10 years; needed before marketingCurrent certificate and proof it was provided
Right to rentTime-limited permission: check in the 28 days before the tenancy startsCheck record, copies and dates, for every adult
Rental property registration detailsUpdate within 28 days of a changeRegistration confirmation and change records

The deposit rules come from government guidance on protection schemes[1]. Landlords must have the electrics checked at least every five years[5] and give existing tenants the report within 28 days[2]. An energy certificate is valid for 10 years[6]. For tenants with time-limited permission, the right to rent check must be done in the 28 days before the tenancy starts[7]. Once England's rental property register is running, registration details must be kept updated within 28 days of any change[8].

A folder standard for every property

Use the same structure for every property, with a sub-folder for each tenancy. Keep it shallow, because deep folder trees hide documents. A structure like the one below works for most agencies, whether it lives in a CRM document module or a cloud drive.

  • Property: landlord agreement, title or ownership evidence, licences, registration, insurance details.
  • Property / Safety: gas safety records, electrical reports, EPC, smoke and carbon monoxide alarm checks, any HMO documents.
  • Tenancy [start date]: agreement or written statement of terms, deposit certificate and prescribed information, proof of service for each document.
  • Tenancy [start date] / Referencing and right to rent: restricted folder for identity documents and checks.
  • Tenancy [start date] / Inspections: inventory, check-in, mid-term inspections and check-out reports with photos.
  • Tenancy [start date] / Correspondence: notices, rent changes, complaints and key messages saved as files.

Naming convention: YYYY-MM-DD_property-ref_document-type_version, for example 2026-11-07_ELM12_EICR_v1. Dates first make the folder sort in order, and anyone can see at a glance whether the latest report is in place.

Permissions by role

A simple permission model for lettings documents.
RoleAccessNotes
Lettings negotiatorsProperty and tenancy folders for their properties, except identity documentsRead and upload; no deletion
Property managersAll folders for managed properties, including inspectionsCan file correspondence and reports
Compliance leadEverything, including identity documents and AML recordsResponsible for retention and deletion
AccountsAgreements, deposit and payment recordsNo identity documents
LandlordsShared view of selected documents via a portalNever direct access to the agency drive
ContractorsJob-specific documents sent as files or links that expireNo folder access

Review access every quarter and remove leavers on their last day. Shared links that never expire are a common leak; set a default expiry and check for old links during the review.

Retention and deletion

Keeping everything forever feels safe but creates its own risk: more data to lose and more to search when someone asks for a copy of their information. Set periods by document type and apply them. Money laundering rules require customer due diligence and transaction records to be kept for five years from the end of the business relationship or completion of the transaction[3]. Tenancy documents are usually kept for a set period after the tenancy ends, long enough to cover deposit disputes and possible claims, which your policy should state.

  1. List document types

    Agreements, deposit records, safety certificates, identity checks, inspections, correspondence and financial records.

  2. Set a period for each

    Base it on legal requirements, limitation periods and your own business need, and write the reason next to it.

  3. Start the clock correctly

    Most periods run from the end of the tenancy or the business relationship, not from when the document was created.

  4. Automate where possible

    Use retention labels or scheduled reviews in the storage system rather than relying on memory.

  5. Record deletions

    Keep a log of what was deleted and when, without keeping the documents themselves.

Choosing where documents live

  1. CRM document module: documents sit with the property and tenancy record, which is ideal for day-to-day use. Check storage limits, search and export.
  2. General cloud drive: flexible and familiar, with good sharing and versioning, but documents are not linked to records unless you are disciplined about naming.
  3. Specialist compliance or inspection systems: strong for their own documents; make sure final reports are copied into the main file.
  4. Paper: keep only what must be kept in original form, scan everything else and file the scan using the standard.

Most agencies use a mix. Decide which system is the master for each document type so staff do not save the same file in three places.

Backups that survive a bad day

Cloud storage is not a backup by itself. If a ransomware attack encrypts a synced folder, or a member of staff deletes a property's files, the change can sync everywhere within minutes. In the government's 2025/26 survey, 74% of UK businesses backed up data securely via a cloud service, but only 48% used other means as well[4], and 43% reported a cyber breach or attack in the year[4].

How UK businesses back up their data, 2025/26Share of UK businesses using each method.
How UK businesses back up their data, 2025/26Comparison. Back up securely via a cloud service: 74%; Back up securely via other means: 48%.74%Back up securely via a cloud serviceBack up securely via a cloud service: 74%48%Back up securely via other meansBack up securely via other means: 48%How UK businesses back up their data, 2025/26Comparison. Back up securely via a cloud service: 74%; Back up securely via other means: 48%.74%Back up securely via a cloud serviceBack up securely via a cloud service: 74%48%Back up securely via other meansBack up securely via other means: 48%

Source: Department for Science, Innovation and Technology (GOV.UK), 2026[4]

Show the data
ItemValue
Back up securely via a cloud service74%
Back up securely via other means48%
  • Keep at least one backup that is separate from the main system and cannot be changed by everyday user accounts.
  • Check that version history is switched on and how far back it goes.
  • Test a restore every quarter: pick a property folder and bring it back to yesterday's state.
  • Know how you would carry on for a week without the main system, including which documents you would need first.

Moving from a messy shared drive

  1. Freeze the old structure

    Make the old shared drive read-only from a set date so nothing new is added to it.

  2. Start every new tenancy in the new standard

    From that date, every new let and renewal uses the new folders and naming.

  3. Migrate by risk

    Move live managed properties first, then tenancies with deposits held, then everything else.

  4. Fill the gaps

    As you migrate, note missing certificates or proofs of service and chase them.

  5. Archive the rest

    Leave closed files in the read-only archive until their retention period ends, then delete.

Proof of service is the document that matters

Many lettings disputes are lost not because a document was missing but because the agency cannot show the tenant received it. Save the evidence with the document itself: the sent email with its attachment and timestamp, a delivery receipt, a signed acknowledgement or a portal record showing the tenant opened it. Where a document goes to several tenants, keep proof for each one, and keep the version they actually received rather than a later edit.

A monthly file check

  1. Pick five managed properties at random and check every folder against the standard.
  2. Confirm safety certificates are current and that proof of service sits beside each one.
  3. Look for documents saved outside the standard, such as in email or on desktops, and file them.
  4. Check that identity documents are only in the restricted folder.
  5. Review shared links and remove any that are no longer needed.

Worked example: a deposit dispute file

Example: a fictional tenant disputes deductions at the end of a two-year tenancy. Under the old system, the property manager spent most of a morning searching email for the check-in inventory, the deposit certificate and the prescribed information, and could not find proof that the prescribed information had been served.

Example, continued: after moving to the new standard, the same request for another property takes ten minutes. The tenancy folder holds the signed inventory, the dated certificate, the prescribed information with an email delivery receipt for each tenant and the check-out report with photos. The evidence is sent to the scheme the same day.

Frequently asked questions

How long should letting agents keep tenancy documents?

Set periods by document type in a written policy. Many agencies keep tenancy records for several years after the tenancy ends to cover disputes and claims, while money laundering records must be kept for five years from the end of the relationship or transaction.

Is cloud storage safe for tenant identity documents?

It can be, with access limited to the people who need it, two-factor authentication on every account, a processor agreement with the provider and a restricted folder for identity documents.

Do we still need paper files?

Only for documents that must be kept as originals. Scan everything else, file the scan using your naming standard and keep a note of where any originals are stored.

What is the most important document habit in lettings?

Keeping proof of service, not just the document. A deposit certificate or electrical report is far less useful if you cannot show when and how each tenant received it.

References

  1. GOV.UK (2026). Deposit protection schemes and landlords: Overview (opens in a new tab) ↑

  2. Ministry of Housing, Communities and Local Government (GOV.UK) (2025). Electrical safety standards in the private and social rented sectors: guidance (full guide) (opens in a new tab) ↑

  3. legislation.gov.uk (The National Archives) (2017). The Money Laundering Regulations 2017, regulation 40: Record-keeping (opens in a new tab) ↑

  4. Department for Science, Innovation and Technology (GOV.UK) (2026). Cyber security breaches survey 2025/2026 (opens in a new tab) ↑

  5. Ministry of Housing, Communities and Local Government (GOV.UK) (2025). Electrical safety standards in the private and social rented sectors: guidance (opens in a new tab) ↑

  6. GOV.UK (2026). Selling a home: Energy Performance Certificates (opens in a new tab) ↑

  7. GOV.UK (2026). Checking your tenant's right to rent: Who you have to check (opens in a new tab) ↑

  8. Ministry of Housing, Communities and Local Government (GOV.UK) (2026). Register your rental property service: guidance for letting agents and property managers (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo