Key takeaways
- Propertymark letting branches agreed an average of 9.92 new tenancies each in August 2026, so every branch handles a steady stream of key sets[1].
- Never label keys with an address: use codes, a register and a sign-out log that shows who holds every set.
- Treat key and access data as security data: 43% of UK businesses reported a cyber breach or attack in 2025/26[2].
- Lost keys and access mix-ups are an easy way to lose a tenant's trust; record every handover with a signature or photo.
Why key control deserves a system
A busy lettings branch holds hundreds of keys: managed properties, void properties, properties for viewings and keys left by landlords for contractors. Every set is a way into someone's home. Propertymark letting branches agreed an average of 9.92 new tenancies each in August 2026[1] and took on 2.97 new fully managed instructions each[3]. Each tenancy means at least two handovers, and each managed instruction adds a permanent set to the key cabinet.
Source: Propertymark, 2026[1]
Show the data
| Item | Value |
|---|---|
| New tenancies agreed | 9.92 |
| New fully managed instructions | 2.97 |
A good key system answers three questions instantly: where is every set, who has it, and when is it coming back? If any of those needs a search through drawers or a call round the office, the system has a gap.
Building the key register
Code every set
Give each property a code that means nothing to an outsider. Keep the code-to-address list in the property management system, never on the key tags or the cabinet.
Record what is in each set
Front door, back door, window locks, meter cupboard, bin store, fobs and remote controls, with a photo of the full set.
Store securely
A locked key cabinet in an area customers cannot reach, with access limited to named staff.
Log every movement
Out and in, with the date, time, person, reason and expected return. Contractors and staff alike.
Chase overdue sets daily
Any set not back by its expected time is followed up the same day.
Audit monthly
Count every set against the register, record discrepancies and investigate them.
Electronic key management systems with tagged keys and logged access are worth considering for larger books. A carefully run paper or spreadsheet log works for smaller branches, provided someone owns it and the audit happens.
Rules for who can take keys
| Who | When | Conditions |
|---|---|---|
| Branch staff | Inspections, viewings, check-ins and check-outs | Signed out and back the same day unless agreed |
| Approved contractors | Booked repair visits | Tenant's agreement to the visit recorded; ID checked; return by end of day |
| Inventory clerks | Check-ins and check-outs | Signed out against the booking; keys returned with the report |
| Landlords | Only by prior arrangement | Written request; tenant told if the property is occupied |
| Tenants | Spare or replacement sets | Identity checked; recorded on the tenancy file |
| Anyone else | Never without written authority | Including family members of tenants or landlords |
The contractor rule matters most. A contractor who collects keys for an unaccompanied visit to an occupied home needs the tenant's agreement to that visit first. Holding keys does not give the agent or the landlord a right to enter; see our guide to access notice.
Handover at check-in and check-out
- List every key and fob on the inventory, with a photo of the set.
- Ask the tenant to sign or confirm by email that they received the listed set.
- At check-out, count against the same list and photograph what is returned.
- Record missing items on the check-out report the same day.
- Test fobs and remotes at both ends; a fob that does not work at check-in becomes a dispute at check-out.
If a tenant asks for an extra set during the tenancy, cut it from the master set held in the office, record it on the inventory and add it to the check-out list. Restricted key systems, where copies can only be cut with authorisation, make this easier to control in higher-risk properties.
Lost keys and lock changes
When a tenant loses keys, the first question is security: were they labelled, and could someone link them to the address? If so, recommend a lock change to the landlord straight away. If not, a replacement set may be enough.
Charging the tenant is regulated. Under the Tenant Fees Act regime, payments a tenant can be asked for are restricted, and any default charge for lost keys must be in the tenancy and limited to reasonable costs. Check the current GOV.UK guidance on permitted payments before raising a charge, and provide the invoice. For changes the tenant requests to the tenancy agreement, agents can charge up to £50 unless they can show higher costs are reasonable[4], which shows how tightly fees are controlled.
Fobs, block access and parking
In blocks of flats, fobs are usually controlled by the block's managing agent, who programmes and deactivates them. A fob lost by a tenant can be a security risk for the whole building. Report lost fobs to the managing agent promptly so they can be deactivated, and keep a record of every fob's number against each flat you manage.
- Ask the managing agent for its fob replacement process and lead time at instruction.
- Record the number of fobs and parking permits issued with each flat.
- Collect all fobs at check-out and test them before issuing them to the next tenant.
- Never give fobs to contractors without telling the managing agent if the block's rules require it.
Keys for empty properties
Void properties attract the most key traffic: viewings, contractors, cleaners, inventory clerks and the landlord all want access in a short window. They are also the most exposed, because nobody is living there to notice a door left unlocked. Keep void keys in a separate section of the cabinet, log each viewing and visit against the set, and ask the last person out each day to confirm by message that the property is locked and the alarm, if any, is set. Check the property in person at least weekly while it is empty and after any contractor visit.
Sales and lettings in one office
Branches that run sales and lettings often hold keys for both in the same cabinet. Use different code ranges for each department, so a negotiator collecting a sales key cannot pick up a managed tenant's keys by mistake. Make the sign-out rules identical, though; a buyer's second viewing and a tenant's repair visit both involve someone's home, and both need the same care.
Smart locks and key safes
Smart locks and key safes can make contractor and void access easier, but they bring their own risks. Codes need changing between every use and every tenancy. Access logs from smart locks are personal data about the tenant's comings and goings, so explain in the privacy notice what is recorded and who can see it. Do not install a smart lock or key safe on an occupied home without the tenant's agreement.
Digital access systems are also targets. Phishing was the most common cyber attack on UK businesses in 2025/26, experienced by 38% of businesses[5]. Protect lock management apps with two-factor authentication and remove leavers' access on their last day.
When things go wrong
A missing set of keys for an occupied home is a serious incident. Tell the landlord and the tenant, explain the risk and recommend a lock change. Record what happened and change the process that allowed it. Poor or delayed communication was the first issue listed among the top causes of lettings disputes at The Property Ombudsman in 2025[6], and keys are one of the few problems where silence feels like a breach of trust.
Ownership and training
Name one person as key controller for each branch, with a deputy for holidays. They own the register, run the audit and chase overdue sets. Every new starter is trained on the rules in their first week, including what to do if a tenant or landlord asks for keys in person. Review the rules once a year and after any incident. A system that depends on everyone remembering will fail on the busiest Saturday of the year.
Example: the monthly key audit
Example (fictional): a branch in Exeter with 160 managed homes runs its key audit on the first Monday of each month. In March, two sets are unaccounted for. The log shows one signed out to a contractor three days earlier and not returned; a call recovers it within the hour. The other was taken for a check-in and never logged back. It turns up in a negotiator's drawer. The branch adds a rule that check-in keys are returned with the inventory report, and the April audit balances.
Frequently asked questions
Should keys be labelled with the property address?
No. Use a code on the tag and keep the code-to-address list in your system, so a lost set cannot be linked to a home.
Can a letting agent let a contractor in with the office keys?
Only with the tenant's agreement to the visit, unless there is a genuine emergency. Holding keys does not give a right to enter an occupied home.
Who pays when a tenant loses keys?
It depends on the tenancy terms and the Tenant Fees Act rules on permitted payments. Charges must be in the tenancy and limited to reasonable costs, with evidence.
How often should we audit the key cabinet?
At least monthly, with overdue sets chased daily.
References
Propertymark (2026). Housing Insight Report, August 2026 (PDF) (opens in a new tab) ↑
Department for Science, Innovation and Technology (GOV.UK) (2026). Cyber security breaches survey 2025/2026 (opens in a new tab) ↑
Propertymark (2026). Housing Insight Report, August 2026 (PDF) (opens in a new tab) ↑
Ministry of Housing, Communities and Local Government (GOV.UK) (2026). Fees you can charge as part of a tenancy (opens in a new tab) ↑
Department for Science, Innovation and Technology (GOV.UK) (2026). Cyber security breaches survey 2025/2026 (opens in a new tab) ↑
The Property Ombudsman (2025). Annual Review 2025 (opens in a new tab) ↑