Key takeaways
- A Propertymark sales branch had an average of 51 homes available in August 2026; that can mean well over a hundred keys in and out each week[1].
- Never write an address on a key tag: use a code that only the key log can decode.
- Every movement is logged: who, which key, why, when out and when due back.
- Run a short weekly audit so a missing key is found in days, not months.
- When a key is lost, tell the client promptly; poor communication is a leading cause of ombudsman complaints[2].
Why keys deserve a system
Keys are the one thing in an agency that can let a stranger into a client's home. A lost set can mean an emergency lock change, an anxious landlord, an awkward conversation with a tenant and, in the worst case, a burglary that the client links back to your office. Yet in many branches the key system is a board of hooks, a paper book and a lot of memory.
The volume is significant. In August 2026 each Propertymark member sales branch had an average of 51 properties available for sale, and letting branches agreed an average of 9.92 new tenancies each in the month[1]. Add managed properties, contractor visits and check-ins, and a busy branch can move hundreds of keys a week. Empty homes add pressure too: Propertymark letting agents reported an average void period of almost four weeks in August 2026[3], and each of those weeks is a run of viewings with the office's keys.
Source: Propertymark, 2026[1]
Show the data
| Item | Value |
|---|---|
| Homes available per sales branch | 51 |
| New tenancies agreed per letting branch | 9.92 |
Code every key
The first rule is simple: a key tag should never identify the property. If a key with a tag saying '14 Elm Road' falls out of a negotiator's pocket, it is an open invitation. Use a code instead, and keep the link between code and address only in the key log.
- Give each property a unique code, such as a letter for the branch and a number, for example K-0412.
- Use a different coloured tag for sales, lettings and managed properties, so a glance at the cabinet shows what is where.
- Number each set within a property: K-0412-1 for the main set, K-0412-2 for the spare.
- Record on the log how many keys are on each set and what they open: front door, back door, window locks, meter cupboard, communal entrance fob.
- Photograph each set when it arrives, so you can prove what was handed over.
What the key log must record
Whether you use a key management system, your CRM or a bound book, the log should answer five questions for every movement: who took which key, why, when, when it is due back and when it actually came back.
| Field | Example entry | Why it matters |
|---|---|---|
| Key code and set | K-0412-1 | Identifies the key without naming the property |
| Taken by | J. Patel, negotiator | One named person is responsible until it is returned |
| Purpose | Viewing, 14.30, applicant ref A-2291 | Links the key to a diary event you can check |
| Time out | 14.05 | Shows how long it has been away |
| Due back | Same day, 17.30 | Sets the trigger for chasing |
| Returned and checked by | 16.10, checked by office owner | A second person confirms the set is complete |
Contractors are the most common gap. If a plumber collects keys for a managed property, the log should show the contractor's name, the job reference and a deadline for return. Tenants have the right to live in their home undisturbed and to notice of visits[4], so the log also helps prove access was arranged properly.
Sign-out rules for the whole branch
Keys live in one locked place
A locked key cabinet or safe, with the code or key held by a small number of named staff. Keys are never left on desks or in unlocked drawers overnight.
No log, no key
A key leaves the cabinet only when the log entry is made. If the system is down, use the paper backup sheet kept next to the cabinet.
Same-day return
Viewing keys come back the same day. Overnight sign-outs need a manager's approval and a reason in the log.
Hand to a named person
Keys are returned to the office owner or the cabinet, never left on reception for someone to pick up.
Check before you hook
When a set comes back, count the keys and fobs against the log before it goes back in the cabinet.
Put the rules on one page by the cabinet and include them in induction for every new starter, including Saturday staff and temps.
Run a weekly key audit
Most lost keys are not lost; they are in a car, a coat or a colleague's drawer. A weekly audit finds them before the client asks. Pick a quiet slot, such as Monday at 9.30, and give one person ownership.
- Print or export every key shown as out. Chase each one with the person who took it.
- Pick ten keys at random from the cabinet and check they match the log, including the number of keys on the set.
- Check that sold, let or withdrawn properties have their keys returned to the client or securely destroyed, with a signed record.
- Review who has access to the cabinet code, and change it when someone leaves the branch.
When a key goes missing
Treat a missing key as an incident, not an embarrassment. The order of events matters.
- Search properly within the first hour: the negotiator's car, the last property visited, other branches and the post room.
- Check the log and diary to establish when and where the key was last seen.
- If it is not found the same day, tell the branch manager and the client. Explain what happened, whether the tag identified the property, and what you propose.
- Agree with the client whether the lock should be changed. If the tag was coded and the key went missing inside the office, the risk may be low; if it was lost in the street with an address on it, change the lock.
- If the property is tenanted, tell the tenant promptly and arrange any lock change at a time that suits them.
- Record the incident, the decision and the cost, and review what went wrong in the system rather than blaming one person.
Silence is the expensive option. The Property Ombudsman resolved 7,681 disputes in 2025, and 61% of the cases it decided went the consumer's way[2]. A client who finds out about a lost key from their tenant, weeks later, is far more likely to complain than one who was told the same day.
Example: a lost viewing key
Example: a fictional negotiator could not find the front door key for a managed flat after a Saturday viewing. The office owner checked the log at 4.30, saw it had not been returned, and the negotiator searched her car and the flat's communal hallway. By 6.00 it had not turned up.
Example, continued: the branch manager called the landlord that evening, explained that the tag carried only a code and that the key was probably in the building, and recommended a cylinder change as a precaution. The landlord agreed. The tenant was told the same evening, the lock was changed on Monday at a time the tenant chose, and the branch paid for it under its incident policy. The key was found a week later in the meter cupboard. The landlord renewed the management contract that spring.
Train people, not just the system
Key rules fail when they feel like paperwork. Explain to new starters why each rule exists: the coded tag protects the client if a key is dropped, the same-day return protects the negotiator if something goes wrong at the property, and the second-person check protects the branch when a client asks who had access. Walk every new starter through a real sign-out and return on their first day, and include Saturday staff and temporary cover.
Review the key log at team meetings once a month. Share near misses openly, such as a key found in a car after two days, and ask what would have caught it sooner. A culture where people admit a missing key at once is worth more than any cabinet.
Key safes, lockboxes and smart locks
External key safes and smart locks can reduce trips to the office, but they move risk rather than remove it. Use police-approved or insurer-approved key safes, change the code after each tenancy or sale, and never share codes by unencrypted message. Check that the client's insurance allows a key safe at the property. Smart locks need their own controls, which are covered in our guide to self-guided viewings.
Handing keys back at the end
When a sale completes or a management contract ends, return every key set listed in the log, get a signature, and close the record. For completions, agree with the seller's solicitor how keys are released so the buyer receives them only once completion is confirmed. Keep the closed log for at least as long as you keep the property file, in case questions arise later.
Frequently asked questions
Should key tags show the property address?
No. Use a code on the tag and keep the link between code and address only in the key log, so a lost key does not identify the home it opens.
Who pays for a lock change if an agent loses a key?
That depends on your terms of business and the circumstances, but most agencies cover it where the loss was their responsibility. Agree the position with the client promptly and record the decision.
How often should keys be audited?
Weekly is a good rhythm for most branches: chase every key shown as out, spot-check a sample in the cabinet and close records for properties that have sold or let.
Can contractors hold keys to managed properties?
Yes, if the key log records the contractor, the job and a return deadline, and the tenant has been given proper notice of the visit.
References
Propertymark (2026). Housing Insight Report, August 2026 (PDF) (opens in a new tab) ↑
The Property Ombudsman (2025). Annual Review 2025 (opens in a new tab) ↑
Propertymark (2026). Housing Insight Report: August 2026 (opens in a new tab) ↑
GOV.UK (2026). Private renting: your rights and responsibilities (opens in a new tab) ↑