Phone enquiries

Tenant maintenance calls: logging repairs right first time

Capture the fault, location, access, photos and urgency on every tenant repair call so contractors attend once, with question sets for common faults.

Ava research teamPublished 7 min read

On this page
  1. Why the first call decides the repair
  2. The intake, in order
  3. Question sets for common faults
  4. Repairs with legal duties attached
  5. Example: a boiler call that avoided a second visit
  6. What a good contractor brief contains
  7. After the call: updates the tenant can rely on
  8. Capturing reports when nobody is free
  9. Frequently asked questions
  10. References

Key takeaways

  • A thin repair report is a common cause of repeat contractor visits: wrong part, no access, no photo, unclear urgency.
  • Use the same intake on every call: what, where, since when, safety, what has been tried, photos, access, vulnerability and urgency.
  • Give the tenant a reference number and a specific time for the next update, and keep that promise.
  • Some reports carry legal duties, such as faulty alarms, which landlords must repair or replace once informed and found faulty[1].

Why the first call decides the repair

A contractor sent to 'a leak in the bathroom' arrives without knowing whether it is the shower tray, the toilet cistern or a pipe in the ceiling void. If the tenant is out and nobody arranged keys, the visit is wasted. If the part is wrong, there is a second visit. Each wasted trip costs the landlord money, frustrates the tenant and makes the agency look disorganised.

Repairs are also where many lettings complaints begin. Lettings disputes resolved by The Property Ombudsman rose 65% to 3,119 in 2025, with poor, unclear or delayed communication listed first among the top issues[2]. A good intake call fixes both problems at once: the contractor has what they need, and the tenant knows what will happen next.

Satisfaction is lower in the rented sector than among owners. In the 2024-25 English Housing Survey, 81% of private renters said they were satisfied with their accommodation, compared with 94% of owner occupiers[3]. How repairs are handled is one of the few parts of that experience an agent directly controls.

Households satisfied with their accommodation, England 2024-25English Housing Survey
Households satisfied with their accommodation, England 2024-25Comparison. Private renters: 81%; Owner occupiers: 94%.81%Private rentersPrivate renters: 81%94%Owner occupiersOwner occupiers: 94%Households satisfied with their accommodation, England 2024-25Comparison. Private renters: 81%; Owner occupiers: 94%.81%Private rentersPrivate renters: 81%94%Owner occupiersOwner occupiers: 94%

Source: Ministry of Housing, Communities and Local Government (GOV.UK), 2025[3]

Show the data
ItemValue
Private renters81%
Owner occupiers94%

The intake, in order

  1. Safety first

    'Before we go on, is anyone in danger? Is there a smell of gas, any burning smell, sparking, or water near electrics?' For a gas smell, the tenant should call the National Gas Emergency number on 0800 111 999[4]. Handle danger before anything else.

  2. What and where

    'What exactly is happening, and where in the property?' Get the room, the fixture and, for appliances, the make and model if the tenant can see a label. 'The kitchen tap is dripping' is useful; 'the boiler is broken' needs more.

  3. Since when, and is it getting worse?

    'When did you first notice it, and has it changed since?' A slow drip for a month is different from a leak that started an hour ago and is spreading.

  4. What has been tried

    'Have you tried anything yet, like resetting the boiler or checking the trip switch?' This avoids sending an engineer for a reset the tenant can do, and tells the contractor what to rule out.

  5. Photos or a short video

    'Could you send a photo or a short video by text or email to the reference I'm about to give you?' Ask for the fault, any label or model number and the surrounding area.

  6. Access

    'When could a contractor get in? Are we OK to use our keys if you're out? Any pets, alarms or parking issues we should tell them about?' Record the tenant's agreement to access.

  7. Who lives there

    'Is there anyone in the household who would be especially affected, such as a baby, someone elderly or someone unwell?' Vulnerability can change the urgency.

  8. Urgency and reference

    Classify the repair using your agreed tiers, give a reference number, and say exactly when the tenant will next hear from you.

Question sets for common faults

Example question sets and photo requests for common repair reports.
FaultExtra questionsPhoto to ask for
No heating or hot waterIs the boiler showing an error code or a pressure reading? Is there power and gas to other appliances?Boiler display and pressure gauge
LeakWhere is the water coming from and where is it going? Can you turn off the stopcock or isolate the fixture?The source and any ceiling or floor damage
Electrical faultHas the trip switch gone? Does it trip again when reset? Any burning smell?Consumer unit, with switches visible
Damp or mouldWhich rooms, how large an area, and is there a leak or condensation on windows?The affected area with something for scale
Appliance not workingMake and model? Error code? Is it on a separate fuse or switch?Rating plate or label
Door, window or lockIs the property secure? Can it be locked tonight?The damaged frame, lock or glass
Blocked drain or toiletIs it one fixture or several? Is anything backing up elsewhere?The fixture and any outside drain cover

Keep the table by every phone and in the scripts of anyone who covers the line, including out-of-hours services. Contractors appreciate the consistency, and a good photo of a boiler display can mean the engineer arrives with the right part the first time.

Some reports must not wait in the routine queue. Landlords must make sure smoke and carbon monoxide alarms are repaired or replaced once they are informed an alarm is faulty and it is found to be faulty[1]. A tenant who rings to say an alarm keeps beeping or has stopped working should get a visit booked promptly, and the log should show when the report came in and when it was fixed.

Electrical reports deserve similar care. Landlords in England must have the electrics in rented properties checked at least every five years by a qualified person[5]. When a tenant reports repeated tripping, sparking or a burning smell, treat it as urgent, and check the date of the last electrical safety report on the file. The report is also a useful signal for the day team: a property with frequent electrical faults may need an early inspection.

If a tenant reports something that sounds dangerous, do not wait for photos. Give the safety advice, escalate and log it.

Example: a boiler call that avoided a second visit

Example. A tenant in a fictional managed house rings on a Monday morning to say there is no hot water. The negotiator checks for danger first: no gas smell, no burning, nobody vulnerable in the house. She asks about the boiler display, and the tenant reads out an error code and says the pressure gauge is below the line. She asks for a photo of the display and the gauge, and the tenant sends it within two minutes.

Example. She logs the repair with the photo, error code, make and model from the label, and access times. She asks the contractor whether the tenant can safely repressurise the boiler. The contractor talks the tenant through it by phone and the hot water returns within the hour, with a visit booked later in the week to find out why pressure dropped. Without the photo and error code, an engineer would have been sent blind, and probably twice.

What a good contractor brief contains

The intake is only half the job; the brief that goes to the contractor is the other half. Send it in writing, even if you also phone, so nothing is lost in a hurried conversation.

  • Property address, flat number and any access notes such as a gate code or where to park.
  • The fault in the tenant's words and your summary, with photos and any make, model or error code.
  • What has already been tried, and anything the tenant was asked not to touch.
  • Tenant contact details and agreed access times, plus whether keys may be used.
  • Urgency tier and the time you have promised the tenant an update.
  • The spend the contractor can authorise without further approval, as agreed with the landlord.

Ask contractors to reply with their arrival window and, after the visit, a short report with photos. That report goes straight into the property file and tells you whether the job is finished or needs a return visit.

After the call: updates the tenant can rely on

The intake ends with a promise, and the promise is what tenants remember. 'You'll get a text by 3pm today with the contractor's name and when they can come' is better than 'someone will be in touch'. Then make sure the text goes out by 3pm, even if the only update is that the contractor has not yet confirmed.

  • Send the reference and a short summary of what was reported by text or email straight after the call.
  • Update the tenant at each stage: contractor booked, contractor attended, follow-up visit if needed, job complete.
  • Tell the landlord what was reported and what was done, in line with your management agreement.
  • Close the job only when the tenant confirms the repair worked.

Management is a meaningful part of many agencies' work; in 2024, 18% of landlords in England used agent management services[6]. Those landlords judge the agency on repairs more than almost anything else.

Capturing reports when nobody is free

Repair calls arrive at all hours, and lettings teams are often out on inspections or check-ins. Make sure every route uses the same intake: the phone, the website form, email and any out-of-hours service. A repairs option on the phone menu helps separate these calls from sales enquiries, and the call volumes guide shows how to see when they arrive. Ava, for example, can take repair reports when the team is busy, log the details and flag urgent ones to your duty contact.

If a tenant reaches voicemail, the greeting should tell them how to report a repair and what to do in an emergency; see voicemail greetings and callback promises. Callback requests about repairs should follow the same ownership rules as any other, set out in callback requests, and every repair call should be logged against the property, as described in CRM call logging.

Frequently asked questions

What information should a letting agent take for a repair report?

Safety check, the fault and its exact location, when it started, what has been tried, photos or video, access arrangements, anyone vulnerable in the household, urgency tier and a reference number.

How can we stop contractors making wasted visits?

Ask for make, model and error codes, request photos of the fault and labels, and confirm access and key arrangements before the job is booked.

Is a faulty smoke alarm a routine repair?

No. Landlords must repair or replace faulty alarms once informed and found faulty[1]. Book a visit promptly and log the dates.

What should a tenant do if they smell gas?

Ventilate, turn off the gas at the meter if safe, avoid switches and flames, and call the National Gas Emergency number on 0800 111 999[4].

References

  1. Department for Levelling Up, Housing and Communities (GOV.UK) (2022). Smoke and Carbon Monoxide Alarm (Amendment) Regulations 2022: guidance for landlords and tenants (opens in a new tab) ↑

  2. The Property Ombudsman (2025). Annual Review 2025 (opens in a new tab) ↑

  3. Ministry of Housing, Communities and Local Government (GOV.UK) (2025). English Housing Survey 2024 to 2025: introduction and key findings (opens in a new tab) ↑

  4. SGN (2026). What to do if you smell gas (opens in a new tab) ↑

  5. Ministry of Housing, Communities and Local Government (GOV.UK) (2025). Electrical safety standards in the private and social rented sectors: guidance (opens in a new tab) ↑

  6. Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Private Landlord Survey 2024: main report (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo