Viewings

Viewing packs: what to hand buyers and tenants

What to put in a one-page viewing pack for buyers and tenants: key facts, material information, costs and next steps, with sales and lettings versions.

Ava research teamPublished 7 min read

On this page
  1. What a viewing pack is for
  2. The one-page rule
  3. Design rules that make a pack readable
  4. What goes in a sales viewing pack
  5. What goes in a lettings viewing pack
  6. Map the pack to Parts A, B and C
  7. Always show the price
  8. Paper, screen, or both
  9. Keep every pack accurate
  10. Example: rebuilding a pack template
  11. Frequently asked questions
  12. References

Key takeaways

  • No more than 2% of home movers in a government-cited poll felt they had enough information before offering; a viewing pack closes part of that gap[1].
  • Keep it to one page: key facts, material information, costs, and what to do next.
  • Map the pack to National Trading Standards' Parts A, B and C so nothing material is missing[2].
  • Show the price or rent; 'price on application' has been called unlawful by National Trading Standards[3].
  • 82% of consultation responses supported wider use of digital property logbooks and packs, so link the paper page to a fuller online version[4].

What a viewing pack is for

A viewing pack is the sheet a buyer or tenant takes away from a viewing. Its job is simple: to help them remember the property accurately, compare it fairly with others, and know what to do if they want it. A good pack also saves negotiators answering the same questions after every viewing, and gives you a consistent record of what each applicant was told.

Buyers and tenants often leave viewings with incomplete information. A poll cited in the government's home buying and selling consultation found that no more than 2% of home movers believed they had received sufficient information before making an offer[1]. The pack will not fix that on its own, but it puts the essentials in their hands at the moment they are deciding.

Home movers who felt they had enough informationBefore making an offer; poll cited by the government
Home movers who felt they had enough informationDonut chart. Felt sufficiently informed (no more than): 2%.Felt sufficiently informed (no more than): 2%2%
  • Felt sufficiently informed (no more than) 2%

Source: Ministry of Housing, Communities and Local Government (GOV.UK), 2025[1]

Show the data
ItemValue
Felt sufficiently informed (no more than)2%

The one-page rule

Most applicants see several properties in a day. A ten-page brochure ends up in a car door pocket; a single page gets read and compared. Put everything an applicant needs to decide on one side of A4 or one phone screen, and link to the full details for anyone who wants more.

  • Lead with the address, the price or rent, and one photograph of the front.
  • Group facts under short labels so they can be scanned in seconds.
  • Use the same layout for every property, so applicants can compare like with like.
  • Leave space for the applicant's own notes, which helps them remember the home.
  • End with a clear next step and a named contact.

Design rules that make a pack readable

A pack that looks like a legal form will not be read. One that looks like a glossy brochure will not be trusted. Aim for something in between: clean, factual and recognisably yours.

  • Use one typeface, at a size readable on a phone without zooming, and plenty of white space between blocks.
  • Put labels in a consistent order, so 'Council tax band' is always in the same place on every property.
  • Write numbers in full with units: 'Service charge: amount per year, last reviewed date', never a figure with no context.
  • Avoid marketing adjectives in the facts section. 'Three bedrooms, the third 2.4m by 2.1m' is more useful than 'generous accommodation'.
  • Print in colour only if every branch can; a pack that turns illegible on a mono printer fails at the worst moment.

Make the pack accessible too. Offer it in large print or as a plain digital file for applicants who use screen readers, and keep images described in words, such as 'south-facing rear garden, about 15m long', so nothing important exists only in a photograph.

What goes in a sales viewing pack

  1. Price and tenure

    Asking price, and whether the home is freehold, leasehold, shared ownership or commonhold. For leasehold, add the remaining lease length, ground rent and service charge.

  2. Council tax and running costs

    Council tax band, the EPC rating and, if the seller agrees, typical annual energy costs.

  3. Property basics

    Property type, construction if non-standard, number and size of rooms from the floor plan, heating type and parking.

  4. Utilities and connectivity

    Water and drainage arrangements, electricity supply, broadband type and mobile coverage.

  5. Anything that affects this home

    Known issues that apply to this property, such as flood risk, building safety, restrictions, rights of way or planning nearby.

  6. Next steps

    How to arrange a second viewing, what you need to put an offer forward and the negotiator's direct contact details.

An EPC gives a property an energy efficiency rating from A to G and is valid for ten years[5], so show the rating and the date it was issued.

What goes in a lettings viewing pack

  • Monthly rent, the date the home is available and the minimum notice arrangements under the tenancy.
  • Holding deposit and tenancy deposit, and which scheme will protect the deposit.
  • Council tax band, EPC rating and who pays which bills.
  • Furnished, part-furnished or unfurnished, with a short list of what is included.
  • Pet policy in plain words: requests are considered, and how to make one in writing.
  • How to apply, what referencing involves and what happens after an application.
  • A link to the agency's published fees.

Letting agents in England must publish a list of their fees on their website, and adverts on third-party sites must list the fees or link to them[6]. The pack should say the same thing, in the same words, as the advert the applicant saw.

Map the pack to Parts A, B and C

National Trading Standards splits material information into three parts: Part A is information that is always considered material for all properties regardless of location; Part B is information that should be established for all properties; and Part C is additional information that may or may not need to be established, depending on whether the property is affected[2]. A pack template built on those parts is easier to check and harder to leave gaps in.

Organising a viewing pack around the material information framework
PartWhat it coversWhere it goes on the pack
Part APrice or rent, council tax band, tenure and lease costs for sales, deposit for lettingsTop block, next to the address
Part BProperty type, construction, rooms, utilities, broadband, mobile signal, parkingMiddle block, as short labelled lines
Part CIssues that affect this property, such as flood risk, building safety or restrictionsA clearly labelled box, only where it applies

Agents are already obliged under the Consumer Protection Regulations not to omit material information from property listings[2]. The pack is not a substitute for a complete listing, but it should never contradict it.

Always show the price

Some agents still leave price off printed details for high-value homes. National Trading Standards has said that 'Price on application' in property listings is unlawful[3]. Show the asking price or guide price on the pack, and the rent for lettings, in the same form as the listing.

The same applies to anything that changes the real cost of the home. For leasehold flats, the service charge and ground rent belong next to the price, not in small print on the back. For lettings, the rent, deposit and any permitted payments should be shown together. Applicants compare total costs, and a pack that hides part of the picture invites the question of what else is missing.

Paper, screen, or both

Many applicants now prefer a link to a printed sheet. A short web page or PDF, sent by text straight after the viewing, works on any phone and can include the full floor plan and photographs. Keep a printed version for applicants who want one, and for viewings where signal is poor.

Expect the digital version to become more important. In the government's consultation on home buying and selling, 82% of responses agreed it should support wider use of digital property logbooks and packs, and 79% backed a mandatory requirement for comprehensive upfront property information[4]. A pack that already links to fuller information will adapt more easily.

Keep every pack accurate

  1. Generate the pack from the same record as the listing, so a change in one updates the other.
  2. Date every version, and keep the old version on file when you change it.
  3. Check the pack against the listing before each launch and after every price change.
  4. Remove the seller's or landlord's personal details; applicants need facts about the home, not about the owner.
  5. Ask the seller or landlord to confirm the facts in writing before the first viewing.

Example: rebuilding a pack template

Example: a fictional agency's printed details ran to six pages, with the council tax band on page five and no mention of the service charge. Its marketing manager rebuilt the template as a single page: price, tenure and lease costs in the top block; rooms, heating, broadband and parking in the middle; a Part C box only where needed; and a QR code linking to the full details.

Example, continued: negotiators reported fewer follow-up calls asking basic questions, and buyers began quoting the pack back to them in offer conversations. The template was then adapted for lettings with deposit, availability and fee information. The details are illustrative.

Frequently asked questions

What should a viewing pack include?

Price or rent, tenure and lease costs for sales, council tax band, EPC rating, the property basics and utilities, anything that specifically affects the home, and the next steps with a named contact.

Should viewing packs be printed or digital?

Both work. A short link sent by text after the viewing suits most applicants, with a printed page available for those who want one.

Can I leave the price off printed details?

No. National Trading Standards has said 'Price on application' in property listings is unlawful. Show the asking price or rent as it appears on the listing.

How is a viewing pack different from a property listing?

The listing is the full advert. The pack is a one-page summary for the viewing, built from the same record so the two never contradict each other.

References

  1. Ministry of Housing, Communities and Local Government (GOV.UK) (2025). Home buying and selling reform (consultation) (opens in a new tab) ↑

  2. National Trading Standards (2023). Full material information guidance published (opens in a new tab) ↑

  3. National Trading Standards (2022). NTS Estate Agency and NTS Letting Agency Teams (opens in a new tab) ↑

  4. Ministry of Housing, Communities and Local Government (GOV.UK) (2026). Home buying and selling reform roadmap (opens in a new tab) ↑

  5. GOV.UK (2026). Selling a home: Energy Performance Certificates (opens in a new tab) ↑

  6. Ministry of Housing, Communities and Local Government (GOV.UK) (2026). Fees you can charge as part of a tenancy (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo