Viewings

Viewings at empty properties: security and insurance

A void-period routine for empty homes on viewings: insurance conditions, utilities, security checks on every visit and a viewing log that protects you.

Ava research teamPublished 7 min read

On this page
  1. Why empty homes need their own routine
  2. Insurance conditions: check on day one
  3. Utilities: on or off?
  4. A two-minute security check on every visit
  5. Make an empty home view well
  6. Keep a viewing log for every empty property
  7. Staff safety at empty properties
  8. When a void runs long
  9. Example: a leak caught at a viewing
  10. Ending the void cleanly
  11. Frequently asked questions
  12. References

Key takeaways

  • 8% of private rented dwellings in England were vacant awaiting a new tenant or owner in 2024; voids are a routine part of property management[1].
  • Read the landlord's insurance for unoccupancy conditions on day one of the void, and diarise any inspections it requires.
  • Decide utilities deliberately: heating, water and power on or off each carry different risks.
  • Do a two-minute security check at the start and end of every viewing, and log it.
  • HSE says employers must manage health and safety risks before people work alone, which covers viewings at empty homes[2].

Why empty homes need their own routine

An occupied home has someone to notice a dripping pipe, a broken window or a stranger in the garden. An empty one does not. During a void, the agent is often the only person going in and out, which makes each viewing both a sales or letting opportunity and an inspection.

Voids are common. In 2024, 8% of private rented dwellings in England were vacant while awaiting another tenant or owner[1], and Propertymark letting agents reported an average void period of almost four weeks in August 2026[3]. Demand is strong, with about ten applicants per available rental[4], so a popular empty flat may see many viewings in a short time. Each visit is a chance to spot a problem early, or to leave a door unlocked.

Private rented dwellings in England by occupancyEnglish Housing Survey, 2024
Private rented dwellings in England by occupancyStacked bar chart. Occupied: 92%; Vacant, awaiting a new tenant or owner: 8%.Occupied: 92% (92%)Vacant, awaiting a new tenant or owner: 8% (8%)Private rented dwellings in England by occupancyStacked bar chart. Occupied: 92%; Vacant, awaiting a new tenant or owner: 8%.Occupied: 92% (92%)Vacant, awaiting a new tenant or owner: 8% (8%)
  • Occupied 92%
  • Vacant, awaiting a new tenant or owner 8%

Source: Ministry of Housing, Communities and Local Government (GOV.UK), 2025[1]

Show the data
ItemValue
Occupied92%
Vacant, awaiting a new tenant or owner8%

Insurance conditions: check on day one

Many landlord and home insurance policies change once a property is unoccupied. Some reduce cover for theft, malicious damage or escape of water after a set number of consecutive days empty; others require regular inspections, the water to be turned off, or the heating kept at a minimum temperature. The details vary by insurer, so do not rely on a general rule.

  1. Ask for the policy wording

    Request the current schedule and the section on unoccupancy when the tenant gives notice, not when the home is already empty.

  2. Note the trigger and conditions

    Record how many days empty the policy allows before conditions apply, and what those conditions are.

  3. Tell the insurer if required

    Some policies require the landlord to notify the insurer when the property becomes empty. Remind the landlord in writing.

  4. Diarise inspections

    If the policy requires inspections at set intervals, book them in the property management diary straight away, separate from viewings.

  5. Keep evidence

    Log each inspection with the date, the name of the person and photographs, in case a claim arises later.

Utilities: on or off?

There is no single right answer. It depends on the season, the length of the void, the insurer's conditions and whether viewings are happening.

  • Electricity: keep on. Check: lights for viewings, alarms working, fridge and freezer off and left open.
  • Heating: low frost setting in cold months. Check: insurer's temperature conditions; thermostat and timer set; boiler pressure.
  • Water: on if viewings are frequent; off and drained for long voids if the insurer requires it. Check: stopcock location; no drips; toilets and taps checked on each visit.
  • Gas: on if heating is needed. Check: gas safety record in date for the next tenancy.
  • Broadband and phone: usually ended with the outgoing tenant. Check: no action needed unless the landlord supplies it.

Take meter readings with photographs on the day the tenant leaves and on the day the new tenant moves in, so bills are allocated correctly.

A two-minute security check on every visit

Ask every negotiator to do the same quick check when they arrive and before they leave. It takes two minutes and is the best defence against a problem going unnoticed for a week.

  • On arrival: look for signs of forced entry, broken glass, damaged locks or a door left on the latch.
  • Inside: check for water on floors and ceilings, damp smells, dripping taps and running toilets.
  • Check alarms: the burglar alarm is set and unset correctly, and smoke and carbon monoxide alarms are present.
  • Post: gather post and junk mail, which advertises an empty home if it piles up behind the door.
  • Before leaving: every window shut and locked, back door locked, lights off unless set on a timer, heating as agreed.
  • Outside: gates shut, bins not overflowing, garden not showing obvious neglect.

If something is wrong, photograph it, tell the property manager straight away and do not book further viewings until it is safe.

Make an empty home view well

Empty rooms can feel cold, echoing and smaller than they are. A few simple steps help applicants picture living there, and most of them also make the property safer.

  • Keep the lights working, and put a lamp on a timer in a front room so the home looks lived in after dark.
  • Set the heating so the home is comfortable for viewings in winter, within the insurer's conditions.
  • Leave a floor plan with room sizes on the kitchen worktop, since empty rooms are hard to judge.
  • Clean once before viewings start and do a quick tidy weekly: dead insects, dust and post soon build up.
  • Air the rooms briefly before each viewing to avoid a stale smell, then close and lock the windows.

Photograph each room on the first day of the void. The photos give you a clear record of condition and help you spot changes during later visits.

Keep a viewing log for every empty property

A viewing log is a simple record that shows who has been in the property and what condition it was in. It protects the landlord, the agency and the applicants if anything goes missing or is damaged.

Viewing log fields, with fictional example entries
FieldExample entry
Date and time in and outThursday, 17.40 to 18.05
Staff memberNegotiator, lettings team
Applicants presentTwo adults, applicant reference recorded
Keys usedCoded set from the branch cabinet
Security checkAll windows and doors secure; no leaks
Issues foundPost collected; bathroom tap dripping, reported

The log can live on the property record in your CRM. What matters is that it is filled in at every visit, by everyone, including contractors and inventory clerks.

Staff safety at empty properties

Empty homes are where negotiators are most likely to be alone with someone they have never met. HSE's guidance for employers says you must manage any health and safety risks before people can work alone, and that there will always be greater risks for lone workers without direct supervision or anyone to help them if things go wrong[2].

  • Verify every applicant's name and phone number before booking a viewing at an empty home.
  • Record viewings in the shared diary with the address and applicant details.
  • Use a check-in and check-out text with a colleague, with an agreed response to a missed check-in.
  • Keep your phone charged and the front door unlocked from the inside during the viewing.
  • Give staff the right to end a viewing immediately if they feel unsafe.

When a void runs long

Most voids last weeks. Some last months, because of refurbishment, a sale or a dispute. Long voids carry extra costs and risks: weekly rather than occasional inspections, draining the water system in winter, and in time a higher council tax bill. GOV.UK says owners can be charged an empty home premium if a home has been empty for at least one year, rising to up to four times the normal bill after ten years[5]. Agree a plan with the landlord at the start of any void expected to last more than a month: who inspects, how often, and what will trigger a decision to change course.

Example: a leak caught at a viewing

Example: during a fictional four-week void in January, a negotiator arriving for an evening viewing noticed a damp patch on the hall ceiling. Following the branch routine, she photographed it, cancelled the viewing politely by phone before the applicant arrived, turned off the water at the stopcock and called the property manager.

Example, continued: a plumber found a slow leak from the bathroom waste pipe. Because the log showed a full security check two days earlier with no issues, the landlord's insurer accepted that the leak had been found promptly and the damage was minor. Viewings resumed three days later. The details are illustrative.

Ending the void cleanly

When a new tenant or buyer is agreed, close the void properly. Take final meter readings, confirm the alarms work on the day the tenancy begins, collect any spare keys issued for contractors, and file the viewing log with the property record. Tell the insurer the property is occupied again if the policy requires it. A tidy close-out means the next void starts from a clear baseline.

Frequently asked questions

Does landlord insurance cover an empty property?

Usually for a period, but many policies reduce cover or add conditions once a property has been unoccupied for a set number of days. Check the policy wording at the start of every void.

Should the water be turned off in an empty rental?

For a short void with frequent viewings, many agents keep it on and check for leaks each visit. For longer voids or in cold weather, the insurer may require it to be turned off and the system drained.

What should be checked at each viewing of an empty home?

Signs of forced entry, leaks, damp, alarms, post, and that every window and door is locked before leaving. Record the check in the viewing log.

Is it safe for staff to do viewings alone at empty properties?

It can be, with a lone-working risk assessment, applicant verification, a check-in routine with a colleague and the right to leave immediately if they feel unsafe.

References

  1. Ministry of Housing, Communities and Local Government (GOV.UK) (2025). English Housing Survey 2024 to 2025: introduction and key findings (opens in a new tab) ↑

  2. Health and Safety Executive (2026). Lone working: protect those working alone (opens in a new tab) ↑

  3. Propertymark (2026). Housing Insight Report: August 2026 (opens in a new tab) ↑

  4. Propertymark (2026). Housing Insight Report, August 2026 (PDF) (opens in a new tab) ↑

  5. GOV.UK (2026). Council Tax: second homes and empty properties (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo