Metrics finance

Asking price achieved: measuring pricing accuracy

Calculate percentage of asking price achieved against the first and final asking price, read what it says about valuation quality, and coach valuers on it.

Ava research teamPublished 7 min read

On this page
  1. Why this number exposes valuation quality
  2. Three versions of the same metric
  3. How to calculate it without fooling yourself
  4. Fields to capture in the CRM
  5. Reading the result
  6. Coaching valuers with the data
  7. Using the metric with sellers
  8. A quarterly pricing review in one hour
  9. Frequently asked questions
  10. References

Key takeaways

  • Measure achieved price against the first asking price, not only the final one; the final figure hides reductions.
  • Most agents are selling below asking: 86% of Propertymark members reported it in August 2026, and only 9% reported sales at asking[1].
  • Asking prices for newly listed homes in Great Britain were virtually flat on a year earlier in October 2026[2], so optimistic pricing has little market growth to rescue it.
  • Report the measure per valuer, per price band and per month of listing, with sample sizes.
  • Pair it with time to sale agreed: high accuracy that takes months to achieve is not good pricing.

Why this number exposes valuation quality

Percentage of asking price achieved compares the price a buyer agreed to pay with the price you advertised. Sales managers like it because it is simple, and sellers like it because they understand it. Used carefully, it is one of the few numbers that directly tests a valuer's judgement. Used carelessly, it rewards the habit of reducing a home three times and then celebrating a sale at, for example, 99% of the final figure.

The market makes the distinction important. In August 2026, 86% of Propertymark member agents reported properties selling for less than the asking price, and only 9% reported sales at asking price[1]. In October 2026 the average asking price of a newly listed home in Great Britain was £371,015, virtually flat on a year earlier at -0.1%[2]. With prices broadly flat, an overoptimistic asking price is not corrected by rising values; it is corrected by reductions, time and a frustrated vendor.

Propertymark agents reporting sales below and at asking price, August 2026Share of member agents reporting each outcome
Propertymark agents reporting sales below and at asking price, August 2026Comparison. Selling below asking price: 86%; Selling at asking price: 9%.86%Selling below asking priceSelling below asking price: 86%9%Selling at asking priceSelling at asking price: 9%Propertymark agents reporting sales below and at asking price, August 2026Comparison. Selling below asking price: 86%; Selling at asking price: 9%.86%Selling below asking priceSelling below asking price: 86%9%Selling at asking priceSelling at asking price: 9%

Source: Propertymark, 2026[1]

Show the data
ItemValue
Selling below asking price86%
Selling at asking price9%

Three versions of the same metric

Agree which version you report, and ideally report all three side by side. Each answers a different question.

Use the agreed price on sales that reached exchange; recalculate if a price is renegotiated after survey.
VersionCalculationWhat it answers
Against first asking priceAgreed sale price divided by the asking price on the first day liveWas the original pricing advice right?
Against final asking priceAgreed sale price divided by the asking price at the time of the offerHow well did the negotiator hold price at the end?
Against valuation figureAgreed sale price divided by the valuer's recommended figure in the written proposalWas the valuer's own judgement right, before any vendor pressure?

The third version is the most revealing and the least often recorded. If the valuer recommended one figure and the vendor insisted on a higher one, the first asking price measures the vendor's optimism, not the valuer's skill. Capture the recommended figure in the CRM on the day of the proposal, before the asking price is agreed.

Example: a home is valued at £325,000, listed at £340,000 at the vendor's request, reduced to £330,000 after five weeks and agreed at £322,000. Against first asking price: 94.7%. Against final asking price: 97.6%. Against the valuation figure: 99.1%. The valuer was close; the problem was agreeing to a higher launch price.

How to calculate it without fooling yourself

  1. Use exchanged sales

    Calculate on sales that reached exchange, using the final agreed price after any renegotiation following a survey. Agreed sales that fall through tell you something, but not about price accuracy.

  2. Weight by value, then check the median

    Report the median percentage for the period and a value-weighted figure. A single very expensive home sold well below asking can dominate a simple average.

  3. Group by listing month

    Put each sale into the month it was first listed, so you can see whether pricing advice given in a given season was right.

  4. Split by band and property type

    Flats, family houses and homes at the top of your local price range behave differently. In London, for example, annual house price inflation was negative 2.2%, driven by falls in flat prices[3].

  5. Add time on market

    Show median days to sale agreed beside every accuracy figure. For example, holding 98% of asking after four months is not the same achievement as 96% in three weeks.

Fields to capture in the CRM

The metric is only as good as the data behind it, and most CRMs do not record every field by default. Add the missing ones as mandatory fields at the right stage so that negotiators cannot skip them.

  • Valuer's recommended figure, entered on the day the written proposal is sent.
  • Launch asking price and the date the home first went live on the portals.
  • Every price change, with date and the reason recorded from a short pick-list: feedback on price, market change, vendor request or new comparable evidence.
  • Accepted offer, buyer position and the date the offer was accepted.
  • Any renegotiation after survey, with the new figure and the reason.
  • Exchange date, so only exchanged sales feed the accuracy report.

With these fields in place the report builds itself each month, and you can trace any surprising figure back to the individual listings that caused it. Without them, managers end up rebuilding history from portal screenshots and memory, which is slow and easy to dispute.

Reading the result

A branch with a low figure against first asking price and a much higher figure against final asking price is launching too high and fixing it with reductions. That pattern costs time, leads to stale-looking listings and harms the vendor relationship. In London in October 2026, 38% of listings were being reduced[4], which shows how common the pattern is in a soft market.

  • Low against first asking, high against final: launch pricing is optimistic; coach valuers on evidence and on saying no to inflated launch prices.
  • Low against both: either the market has moved since listing or negotiation is weak; check how offers are presented to vendors.
  • High against both, but long time on market: prices are held but at a cost; check whether better initial pricing would have sold sooner.
  • Very high against all three, with short time on market: possible underpricing; look for multiple offers and whether the vendor could have achieved more.

No national body publishes a standard percentage-of-asking benchmark that UK agents calculate in the same way, so compare yourself with your own history and with a few local competitors' sold prices against their original listings. For the commercial risk of winning stock on price, see the real cost of overvaluing.

Coaching valuers with the data

Share each valuer's figures monthly in private, then discuss patterns in a team meeting without naming individuals. The aim is better evidence at the valuation, not blame.

  1. Ask the valuer to bring three comparables to each review: the strongest sold evidence used, the closest active rival listing and one sale that went below asking.
  2. Review the written proposal for any home that sold more than a few points below the recommended figure. Was the evidence weak, or did the market move?
  3. Practise the conversation about launch price. Valuers often know the right figure but give way when the vendor mentions a rival's number.
  4. Track how often each valuer agrees to a launch price above their recommended figure, and what happened next.

Script for the valuation appointment: 'Based on these three sales, I'd expect a buyer to pay around this figure. We can launch a little higher if you want to test the market, but I'd recommend we agree now that if we have no strong offers in four weeks, we move to the evidence-based figure. That way you know the plan from day one.'

Using the metric with sellers

Sellers ask about achieved prices because they want proof of skill. Answer with honest numbers and explain which version you are quoting. Publishing a percentage against final asking price, without saying so, can mislead a seller who assumes it relates to the original price. The government's own research found that no more than 2% of home movers believed they had received sufficient information before making an offer[5]; clear, accurate information helps sellers as much as buyers.

Keep marketing claims based on achieved prices factual and checkable, state the period and sample, and update them when the data changes. Review your figures alongside revenue per negotiator and the instruction-to-sale rate, because accurate pricing usually shows up as faster sales and fewer withdrawals as well as better percentages.

A quarterly pricing review in one hour

Once a quarter, block an hour with the valuers and the sales manager. Bring the three versions of the metric for the quarter, split by valuer and price band, and a list of every home that was reduced more than once. Walk through the five largest gaps between recommended figure and agreed price, and agree one change to how valuations are presented or evidenced.

Repeat the review with the same format each quarter. Over a year, the trend in accuracy against the valuer's own figure is the best evidence you can give an owner that pricing advice is improving, and it gives valuers a fair, specific basis for development.

Frequently asked questions

How do you calculate percentage of asking price achieved?

Divide the agreed sale price on exchanged sales by the asking price and multiply by 100. Report it against the first asking price, the final asking price and the valuer's recommended figure, because each tells you something different.

Why is achieved price against final asking price misleading?

It ignores reductions. A home reduced twice can sell at 99% of its final asking price after months on the market, which says little about the quality of the original pricing advice.

Are most UK homes selling below asking price?

In August 2026, 86% of Propertymark member agents reported properties selling for less than the asking price, and only 9% at asking price[1].

Should I publish my percentage of asking price achieved?

Only if it is accurate, states the period and sample, and says which asking price it is measured against. Otherwise it can mislead sellers comparing agents.

References

  1. Propertymark (2026). Housing Insight Report, August 2026 (PDF) (opens in a new tab) ↑

  2. Rightmove (2026). House Price Index, October 2026 (opens in a new tab) ↑

  3. Office for National Statistics (2026). Private rent and house prices, UK: October 2026 (opens in a new tab) ↑

  4. Rightmove (2026). House Price Index, October 2026 (opens in a new tab) ↑

  5. Ministry of Housing, Communities and Local Government (GOV.UK) (2025). Home buying and selling reform (consultation) (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo