Property management

Smart devices in rentals: privacy, access and handover

Smart thermostats, doorbells and locks in rented homes: who controls accounts and data, how to reset between tenancies and what the PSTI rules mean.

Ava research teamPublished 7 min read

On this page
  1. The question behind every device: whose is it?
  2. A device register for each property
  3. Security: the weak point is usually the account
  4. Before the landlord buys: five questions
  5. Privacy: what you should not be able to see
  6. Access and repairs with smart locks
  7. When a tenant wants to fit their own
  8. Between tenancies: the reset checklist
  9. Example: the thermostat nobody could control
  10. Frequently asked questions
  11. References

Key takeaways

  • Decide for every connected device who owns it, who holds the account and who can see its data, and write that into the tenancy file.
  • Smart products sold in the UK since 29 April 2024 must have unique or user-set passwords and a published security update period[1].
  • A smart lock does not change access rules: inspection visits still need notice, such as 24 hours in writing for a repair inspection[2].
  • Phishing hit 38% of UK businesses in 2025/26[3], so device accounts need the same password and two-step checks as your other systems.

The question behind every device: whose is it?

Landlords add smart thermostats to save energy, leak sensors to catch escapes early and keypads to avoid key handovers. Tenants bring their own video doorbells, speakers and plugs. Each device creates three questions the agency has to answer: who owns the hardware, who controls the account and app, and who can see the data it collects. If those answers are not written down, the agency ends up in the middle of disputes about privacy, access and repairs.

Set a simple rule. Devices the landlord supplies are landlord equipment, listed on the inventory and managed under a documented account. Devices the tenant installs belong to the tenant, need permission if they involve fixings or wiring, and leave with the tenant. Anything in between, such as a landlord-supplied doorbell the tenant links to their own phone, needs a clear note about what happens to the account at handover.

A device register for each property

Example device register entries
DeviceTypical ownerWho controls the appData it capturesHandover action
Smart thermostatLandlordTenant for daily use; landlord account as ownerHeating schedules, occupancy patternsRemove tenant user, reset schedules
Leak or humidity sensorLandlordAgency or landlordAlerts, humidity readingsCheck battery, confirm alert contacts
Smart lock or keypadLandlordTenant codes; agency adminEntry logsDelete all user codes, issue new
Video doorbellOften tenantTenantVideo and sometimes audio of visitorsTenant removes; make good fixings
Wi-Fi routerBroadband customerAccount holderConnected devicesReset if landlord-supplied

Keep the register with the inventory and update it at each check-in, inspection and check-out. It takes minutes to maintain and saves hours when a tenant reports that the heating has a mind of its own.

Security: the weak point is usually the account

Agencies and landlords are prime targets for account takeover because they hold keys, codes and personal data. In the 2025/26 government survey, 43% of UK businesses reported a cyber security breach or attack[4], and phishing was the most common type, affecting 38%[3]. In the administration and real estate sector group, 83% said cyber security was a high priority[5].

Cyber security in UK businesses, 2025/26
Cyber security in UK businesses, 2025/26Comparison. Businesses reporting a breach or attack: 43%; Businesses hit by phishing: 38%; Admin and real estate firms rating cyber a high priority: 83%.43%Businesses reporting abreach or attackBusinesses reporting a breach or attack: 43%38%Businesses hit by phishingBusinesses hit by phishing: 38%83%Admin and real estate firmsrating cyber a high priorityAdmin and real estate firms rating cyber a high priority: 83%Cyber security in UK businesses, 2025/26Comparison. Businesses reporting a breach or attack: 43%; Businesses hit by phishing: 38%; Admin and real estate firms rating cyber a high priority: 83%.43%Businesses reporting a breach orattackBusinesses reporting a breach or attack: 43%38%Businesses hit by phishingBusinesses hit by phishing: 38%83%Admin and real estate firms ratingcyber a high priorityAdmin and real estate firms rating cyber a high priority: 83%

Source: Department for Science, Innovation and Technology (GOV.UK), 2026[4]

Show the data
ItemValue
Businesses reporting a breach or attack43%
Businesses hit by phishing38%
Admin and real estate firms rating cyber a high priority83%

The product rules help with the hardware. Under the UK product security regime that came into effect on 29 April 2024, connectable consumer products must have passwords that are unique per product or set by the user, manufacturers must say how to report security issues, and they must publish the minimum period for which security updates will be provided[1]. When you or the landlord buy devices, check the update period is published and still has years to run.

  • Use a dedicated agency email for landlord-owned device accounts, never a negotiator's personal address.
  • Turn on two-step verification for every device app that offers it.
  • Store admin credentials in your password manager, not in the tenancy notes.
  • Remove staff access the day someone leaves the agency.
  • Treat any message asking you to re-enter a device login as possible phishing.

Before the landlord buys: five questions

Landlords often ask the agency whether a device is worth fitting. Answer with criteria rather than enthusiasm. A device earns its place when it reduces a real risk or a real cost, and when the agency can support it without extra visits.

  1. What problem does it solve? Leak and humidity sensors address known claims and damp complaints. A smart speaker solves nothing for the landlord.
  2. Who will receive the alerts, and at what hours? An alert that goes to an unmonitored inbox adds liability rather than removing it.
  3. How long will the manufacturer provide security updates, and is that date published?
  4. Can users be added and removed individually, so a handover does not need a factory reset?
  5. Does it work without the internet for basic functions, such as heating or opening the door, if the broadband fails?

If the answers are vague, recommend a simpler product. A conventional programmable thermostat that the tenant controls is better than a smart one that nobody can manage after the first tenancy.

Privacy: what you should not be able to see

Smart heating data can reveal when someone is home. Entry logs show who comes and goes. Cameras capture visitors, neighbours and the street. Once a tenant lives in the home, the agency and landlord should be able to see only what they need for safety and maintenance, and should say so in writing.

  • Agree in the tenancy pack which alerts the agency receives, such as leak, freeze or high humidity warnings, and that it does not monitor schedules or occupancy.
  • Do not install landlord-controlled cameras that record inside the home or the tenant's private entrance.
  • If a landlord-owned doorbell is fitted, hand control to the tenant and remove landlord access to footage.
  • If you collect any personal data from devices, include it in your privacy notice and retention schedule, and delete it at the end of the tenancy.

A useful test: if you would feel uncomfortable explaining to the tenant exactly what the device lets you see, switch that access off.

Access and repairs with smart locks

Keypads make contractor visits easier, but they do not change the tenant's right to quiet enjoyment. Under the implied repairing covenant, a landlord or someone they authorise in writing may enter to view the condition and state of repair at reasonable times of the day and on giving 24 hours' notice in writing to the occupier[2]. Your tenancy agreement may set out further access terms. A working code is not permission to enter.

  1. Give notice

    Send written notice with the date, time window, purpose and who will attend.

  2. Issue a temporary code

    Create a single-use or time-limited code for the contractor rather than sharing a master code.

  3. Log the visit

    Record entry and exit times from the lock log against the job reference.

  4. Revoke the code

    Delete the temporary code once the job is complete and note it on the job.

When a tenant wants to fit their own

Tenants increasingly ask to fit video doorbells, smart bulbs or plug-in cameras. Plug-in items need no permission. Anything that is screwed, wired or drilled needs the landlord's consent in writing, with a condition to remove it and make good at the end. For doorbells, ask the tenant to angle the camera so it covers their own entrance rather than a neighbour's door or a shared hallway, and to tell other residents in a shared building. Record the consent and the device on the register so check-out staff know what to expect.

Between tenancies: the reset checklist

The handover is when most smart-device problems start: the old tenant still controls the heating, the new tenant cannot get into the app, and nobody knows the admin login. Build these steps into check-out and check-in.

  1. At check-out, remove the outgoing tenant's user from every landlord-owned device and delete their lock codes.
  2. Ask the tenant to remove their own devices and make good any fixings, as with any other tenant item.
  3. Factory-reset devices that store personal data and cannot remove users individually.
  4. Check firmware is up to date and the security update period has not ended.
  5. Replace batteries in sensors and confirm alert contacts are current.
  6. At check-in, invite the new tenant to the device apps, explain what the agency can see, and record it on the inventory.

If a device has reached the end of its update period, recommend the landlord replaces it. An unsupported lock or camera is a liability, not a convenience.

Example: the thermostat nobody could control

Example: a landlord in Bristol fitted a smart thermostat linked to his own phone. Two tenancies later, the heating kept switching to his old schedule and the new tenant reported a fault. The agency had no login. The fix took a site visit, a factory reset and a new account under the agency's device email, with the tenant added as a user. The agency then added the thermostat to the device register, along with the leak sensor under the sink, and wrote the reset steps into its check-out routine. The next handover took five minutes.

Devices also show up in landlord conversations about value. A landlord who sees fewer leak call-outs and a tidy handover record is more likely to stay with the agency, a point we pick up in retaining landlords.

Frequently asked questions

Can a landlord install a smart lock in a rented home?

Yes, as landlord equipment listed on the inventory, but it does not change access rules. Entry for inspections still needs notice, such as 24 hours in writing[2].

Who should control a smart thermostat during a tenancy?

The tenant should control daily use. The landlord or agency keeps an owner account for maintenance only, and should not monitor schedules or occupancy.

What security rules apply to smart devices sold in the UK?

Since 29 April 2024 connectable products must have unique or user-set passwords, a way to report security issues and a published minimum security update period[1].

What happens to a tenant's video doorbell at the end of a tenancy?

It belongs to the tenant, who removes it and makes good any fixings, as with any other tenant item.

References

  1. Department for Science, Innovation and Technology (GOV.UK) (2024). The UK Product Security and Telecommunications Infrastructure (PSTI) product security regime (opens in a new tab) ↑

  2. legislation.gov.uk (The National Archives) (1985). Landlord and Tenant Act 1985, section 11: repairing obligations in short leases (opens in a new tab) ↑

  3. Department for Science, Innovation and Technology (GOV.UK) (2026). Cyber security breaches survey 2025/2026 (opens in a new tab) ↑

  4. Department for Science, Innovation and Technology (GOV.UK) (2026). Cyber security breaches survey 2025/2026 (opens in a new tab) ↑

  5. Department for Science, Innovation and Technology (GOV.UK) (2026). Cyber security breaches survey 2025/2026 (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo